CARBOMECH MCT250 SYNC


Designed for high speed PCB drilling

 

High efficiency DC Motor reduced heat generation

 

Zero slip on the rotating shaft

 

Low dynamic runout on all speed range

 



Operating Speed Range   10’000 to 250’000 rpm

Vibration   < 1.0 mm/s RMS

Dynamic run out   < 5 micrometers on all speed range

Axial load   > 100 N at 6.0 bar

Body Diameter   61.9 mm

Collet System   Auto Tool Change

Tool Shank Diameter   2.000, 3.175 mm

Motor Type   DC 3-PHASE, 2-POLE, SYNCHRONOUS

Continuous Output Power   550 W

Peak Power   1.5 kW

Air flow   100 l/min at 6.0 kg/cm2

Air supply   5.5 to 6.0 kg/cm2

Cooling water flow   1.4 l/min at 1.6 bar